Payment & Shipping Terms:
High Power 3400W Hot Air Gun 70mm Nozzle Come With Rubber Press Roller For Tarpaulin
3400W High Power
70mm Wide Nozzle
|Product Name||LST3400 hot air gun|
20～700 ℃ distance adjustable
► Welding of thermoplastic materials as well as single-ply flexible plastics and modified bitumen in the form of boards, tubes, profiles, lining membranes, coated materials, films, foams, tiles and sheets. The following procedures are possible: overlap welding, welding with rod, with tape, butt welding and melt welding.
► For foaming, ending and sealing of the thermoplastic semi-finished materials and plastic granules.
► Drying of water-damp surfaces.
► Shrinking of heat-shrink sleeves, films, tapes, solder sleeves, preformed and mould part.
► Soldering of copper pipes, solder joints and metal foils.
► Defrosting of frozen water pipes.
► Activating and dissolving of solvent free adhesive and fusion adhesives
► Igniting of wood shavings, paper, coal or straw in furnaces
Service and repairs :
♦ Clean polluted air filter with a small brush or replace it
♦ Clean welding nozzle with a steel brush
♦ Check mains cable and plug for electrical and mechanical damage.
Unplug the tools before opening it.
Incorrect use of hot-air blowers can cause fire and explosion hazard, expecially near combustible materials and explosive gases
Do not touch heater tube and nozzle when they are hot. They may cause burns.Do not point hot air flow in the direction of people or animals
The voltage rating stated on the tool must correspond to line/mains voltage
For personal protecting on the building site, we strongly recommend the tool be connected to a GFCI(Ground Fault Circuit Interrupter)or a RCCB (Residual Current Circuit Breaker)
The tool much be operated with supervision. Heat can reach combustible materials which are out of sight.
Protect tools from damp and wet
Do not touch the hot nozzle and make sure to place it on a heat resistant surface because of the fire hazard..
Put the nozzle on the heater tube and secure the nozzle by the screw on the cap.
Use original nozzles only.
Thanks for your kind reading ! Any questions or demand contact me freely : )