Payment & Shipping Terms:
|Machine Name:||Leister Air Gun Welding Machine||Model:||TOP 2000 C|
|Welding Temperature:||350-400 Degree||Welding Power:||2000W|
|Welding Speed:||2-15m/min||Welding Wire:||10 Meters|
|Welder Wheel:||Aluminum Wheel||Temperature Scope:||20-600 Degree|
110V / 220V AUTO Welding Machine For Banner / Heat Welding Machine / Plastic Welding Machine
Machine Details :
|Welder model||Top 2000 C|
|Welder air gun||Leister hot air gun|
|Welder Warranty||One year|
|Welding width||2-4 cm|
|Welding temperature||350-400 degree ( normal )|
|Welding Voltage||110 V/220 V|
|Welding Frequency||50-60 HZ|
|Welder wheel||Aluminum wheel|
Operation Step :
• Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
• The overlap width of the two pieces is about 3-mm, the width of the nozzle of hot seaming machine.
• Put the machine nozzle between two overlap pieces.The press-wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
• Switch on the motor power and then adjust speed.
• Turn on the movement switch.
• Press heating power key to adjust temperature.
• Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
• Turn the bar by clockwise to cease the automatic work.
• The operator should control the moving direction and make sure the nozzle connect both with upper and under piece of cloth
Any part of this machine being bumped of fallen can cause some damage impossible to be repaired.So please pay attention to carry it.It is suggested to move the machine by manpower and put it down carefully
The place for installation must be flat and the floor is strong enough to support the machine and moreover, the installation place should close to power supply
Please check if there is damage or missed parts after unpack the machine.Any problem, please contact us or the local agent immediately
Please sweep away the anti-rust oil from the machine with detergent and re-lubricate with light lubricating oil after installation
Keep the installation place no dust and avoiding sunshine
General instruction for safety :
♦ Keep the working place clean. Messing up and the disorderly working place cause disaster
♦ Choose the work place carefully and use the machine in a bright and dry circumstance.
♦ The electricity, controlling box and protective facilities have to be in the proper order after finishing daily work. The electrical power supply has to be switched off definitely.
♦ The machine has to be stopped before gets maintenance or replacing the parts.
♦ Use standard or indicated tools when dismantling or replacing parts.
♦ For safety and the long life of the machine, please do not let the machine operates overtime.
♦ If any special incidents happened, please stop the machine first for repairing, And do not deal with the special incident with improper procedures.
♦ If the machine is operated on land, keep the work place clean and no dust there. If dust or something blocks the inhaling filter of heater, the heating wind can not come cut adequately and then temperature inside of filter will rise to let the heater burn down.
Operation Notice :
► During operating, if the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed.
► During operating,if the seaming part is not in right position, please stop to adjust fixing position.
► During operating, make sure clothes are flat so that stick together smoothly.
►The hot wind of heater cannot touch the press-wheel or the rubber of press-wheel is easy to be burned down.
► Adjust temperature to zero before turn off the heater.Switch off after 5-10 minutes
1. Q : What is the use of the machine ?
A : Use hot air to make the PVC Banner welding together
2. Q : What's the machine work type ?
A : It's Automatic welding
3. Q : How long is the warranty period?
A : The Warranty is one year
4. Q : Which kinds of hot air gun it use ?
A : Leister hot air gun
5. Q : What kinds of materials can it welding ?
A : It can welding PVC / Banner / Flex and other outdoor materials can be hot melt